Description:
Product parameters
Name: High Strength Quick Release Shaft
Brand: DECKAS
Color: Black/Red/Blue/Titanium
Weight: about 85 grams (one pair)
Applicable: mountain bike
Material: stainless steel/aluminum alloy/copper
Features: light weight, high strength, heat and corrosion resistance, long service life
size:
Front quick release lever about 120mm
The rear quick release lever is about 150mm
Specifications:
¨ç Demolition:
Hold the quick release handle with the fingers of one hand and turn it 180¡Æ in the axial direction. The magnitude of the pulling force is determined by the force during installation. Under normal circumstances, the force should be relatively large, and it takes some effort to move. This kind of force has a certain "elasticity", rather than pulling hard. With the other hand, after turning the nut on the other end of the quick release a few turns in the loose direction, the wheel set can be easily removed.
¨èAssembly:
First put the quick release lever in the "open" state, install it into the axle slot on the fork frame together with the wheel, tighten the nut of the quick release lever, and at the same time pay attention to keeping the wheel in the center of the bicycle structure, and when dismantling it in the axial direction. Turn the quick release handle 180¡Æ in the opposite direction, and the strength should be moderate enough to leave a red mark when the general male pushes the device with the palm of his hand. When assembling, pay attention to the direction of the quick release handle. The quick release handle of the front axle should be basically parallel to the front fork, and the quick release handle of the rear axle should be between the horizontal pull fork and the diagonal pull fork.
¨éCheck:
After assembly, it should be checked to prevent accidents. The method is: if it is the front wheel, use the right hand to hold the "grip force" to lift the front wheel, and use the left hand to punch the upper part of the front wheel, if there is no looseness, it is qualified. If it is the rear wheel, hold the rear end of the frame beam with the left hand, lift the rear wheel, and punch the upper part of the rear wheel with the right hand. If there is no looseness, it is qualified.
Package Included:
A pair of quick release
Notes:
It is recommended to turn the handle control up or back at the end to avoid scratching the ground
![](`https://ae01.alicdn.com/kf/S3c48121b26694aab8dece0134a949db2h.jpg`)
![](`https://ae01.alicdn.com/kf/S8718e63f81d7414d9fe3da97e9ee344e0.jpg`)
![](`https://ae01.alicdn.com/kf/S0f668fce13604040aaf8c6062021bdccS.jpg`)
![](`https://ae01.alicdn.com/kf/S2ba04650c5ed4dc69849749212809457V.jpg`)
![](`https://ae01.alicdn.com/kf/S388b487bb6284581876dcced7cb80681h.jpg`)
![](`https://ae01.alicdn.com/kf/S977ca29355804c98ac3134ac0d81d09e0.jpg`)
![](`https://ae01.alicdn.com/kf/S7fa16a89328c411696f9e507008bfc6aS.jpg`)
![](`https://ae01.alicdn.com/kf/S8b1c5b5af7f4406abb05102237e3aa8f6.jpg`)
![](`https://ae01.alicdn.com/kf/S44228ca1a0214f249a4d86271d01998ef.jpg`)