24v 36v 4 WD Hub Motor Controller Panel Electric Scooter Remote Control Unit ESC Electric Skateboard Driver Board
Forward/reverse/different speed/cruise
Can the driver work in dual drive, only 1 board work?
Yes, each board could work separate with the remote controller. If you want only 1 board work, just turn another one off.
Motor could run in 1, 2pcs, 3 pcs and 4 WD
Description of the Controller performance
1,2.4G remote control transmission within effective distance 8 meters
2, Electromagnetic brake
3,Dual mode, self-recognise, it could work with and without hall sensor
4,High and low speed selection, Forward/Reverse
5,Rated voltage, 24/36V,
Corresponding to6S.7S 10S.12S battery pack
6,Rated current: 18A
7,Peak current: 50A
8,Controller characteristics, low speed and high torque
9, Protection, stall protection / maximum peak current protection /over current/voltage / overload protection
10, Easy use, the controller and the remote control have been connected to the code before delivery.
Basic data of the remote control board and controller
Remote controller with board |
Driven Motor |
Model |
Voltage |
Total Control power |
Motor quantity |
Motor type |
Max power |
Max speed rpm/min |
Work without hall sensor |
4WD |
24v/36v |
800w |
4 |
BLDC |
1040w |
8000 |
Yes |
|
|
|
|
|
|
|
|
How to connect the board with motor?
A. The board could with without hall sensor, just connect 3 phase wire from hub motor to board.
B. It didn`t need same color connection.
C. To change the direction of the wheel, you can change any color from the board to motor.
How to do the test?
A. Please connect the battery and motor and controller board well first, without any loosen.
1. For the motor, only 3 phase wire needs connected.
2. Turn on the power key of board and remote controller.
B. Forward / reverse/ brake
1. Forward, push front is accelerating
2. Reverse, when you do the accelerating press the power key of remote controller twice, it will run reverse. (Please just do short press, twice short press)
3. Brake, push the accelerator back, it will be brake
C. Speed changing/ cruise
1. Short press the function key when you do accelerating, each short press, the speed will be change, there is 4 level speed.
2. Cruise, when you do accelerating and short press the power key, it will into cruise
Kindly please note, each press is short press.
The remote controller could work with each board, it will work with 1 board and 2 boards at same time. If we only want 2 wheels run, just turn off of another board.
How to check the power display?
Details of the goods
Remote controller